SPECIFICATIONS
Brand Name: GKFLY
Origin: Mainland China
Battery Capacity(mAh): 18000-20000
Peak Current: 1200 A
Conversion Rate: >90%
Number Of Built-in Batteries: 4
External Testing Certification: ROHS
External Testing Certification: FCC
External Testing Certification: ce
External Testing Certification: CCC
Certification: FCC
Certification: CE
Certification: CCC
Item Weight: 398g
Fast Charge: One Way Fast Charge
Certified: ce
Certified: FCC
Certified: SDS
Voltage: 12V
Special Features: USB
Special Features: Lighting
Special Features: SOS Lighting
Battery Cell Composition: Lithium polymer battery
Operating condition: -20~65 Degrees Celsius
Cycle boot life: Start car more than 3000 times
Ship from Russia: About 5-15 Delivered Date
Warranty: One year warranty
 
Model: GG-JS-RATEL
Size: 180*85*35mm
Weight: 398g
Type-C Input: 5V--2A
USB Output: 5V--2A; 5V--1A
5.5mm DC Output: 15V--5A
Jump Start Output: 12V(on-load) / 16V(no-load)
Full charging time: approx 6h
Peak current: 1200A
Operation temp. : -20℃～60℃
Protections: Short circuit proof, over charge protection, discharge protection
Lifetime: >3000 cycles
 
Jump start 12V vehicle instruction:
1. Make sure that the remaining of power is not less than 80%, fully charged is suggested.
2. Plug the cord of jumper cable into the jump start socket.
3. Connect the RED clamp to the vehicle's battery positive (+) terminal, and connect the BLACK clamp to the vehicle's battery negative (-) terminal.
4. Start the vehicle, and interval time between each starting must be OVER 30 seconds. If after 3 times failure, stop trying again, please check if there are problems of the vehicle engine or circuit. meanwhile, check the jump starter, if problem, please return it to the distributor.
5. When the vehicle is started, remove jumper cable from jump starter, and disconnect red and black clamps to the vehicle battery terminals within 30 seconds.
6. Leave the vehicle's engine running.
 
LED flashlight instruction:
1. Press and hold the switch button 3 seconds to start the LED light.
2. There are 3 modes for LED light appear in order (illumination, strobe, SOS ) if you continue to press slightly.
 
Parts list:
1. Jump starter unit
2. Jumper cable with clamps
3. Charging cable
4. User manual
5. 5.5mm cigarette lighter adapter
 
 
Please pay attention to this note:
1. Please charge after receive jump starter.
2. Charge every 3 months, low power may fail start.
3. Charge phone tablet only when it's in urgent need. efficiency is about 50%.
4. The charge speed or discharge speed will be fast during the last 15% power of the jump starter. Please do not worry about these problems. This is the characteristic of high-rate lithium batteries, and it will not affect product quality and normal use.

Specifications:
Model: GG-JS-M43
Battery Capacity :18000 mAh
Peak Current :1200A
Starting Current :600A
Car Jump Start Output :12V
USB Output :5V-2A
Gas Engine Starting :Up to 6.0L
DieselEngine Starting :Up to 4.0L
Operating Temperature :-20℃-60℃
Excellent adaptability:
Low temperature startup
Fearless of severe cold
Upgrade Protection-- Safe and efficient use of high-quality electrical cores:
Short circuit protection
Overcharge protection
Constant current protection
Voltage stabilizing protection
Over discharge protection
Temperature protection
Magnetic field protection
Polymer lithium battery
Diesel Gasoline Dual Start Strong Start:
Gasoline engine vehicle up to 6.0L
Diesel engine vehicle up to 4.0L
Dual USB interface:
Support mobile phone fast charging
Emergency Rescue LED Light:
Torch mode:
Constant light mode
48 hours
Press and hold the “Power” key for 3 seconds to turn on.
Flashing mode:
High-frequency flash
Press the switch again to flash.
SOS mode:
3 short / 3 long/ 3 short distress signal flashing mode
48 hours
Press the switch again to SOS mode.
Just four steps to start the car:
1. Insert the clip into the power port, and ensure sufficient power.
2. Connect the red clip to the positive electrode of the car battery“+”.
Connect the negative electrode of the car battery with a black clip“-”
3. Return to the car and start the car.
4. Remove the clip after starting the vehicle (recommended to be removed within 30 seconds).